ACT! 4.0 can be customized to include a button on its toolbar to launch DAZzle and display a menu of choices for using the two programs together. The procedure for doing so in ACT! 4.0 is different from the ones in DAZzle’s on-line help, which apply to ACT! 2 and 3.

Note: If you don’t have DAZzle version 2.6b or later, these procedures work for single addresses but the Print List From File and Dial-A-ZIP List From File options will affect only the first address in your ACT! list. You need to upgrade to the current version of DAZzle, which was rewritten to work with ACT! version 3.0 and up.

Installing the DAZzle Macro in ACT! 4

1. Select Customize from the Tools menu
2. Select the Commands tab
3. Click the New button
4. Enter the following information:
   • Command name: DAZzle
   • Command line: c:\dazzle\dazzle.exe -ACT (Note: This line will vary if you installed DAZzle to a different directory.)
   • Start In: (blank)
   • Description: Run DAZzle
   • Button: DAZzle
   • Menu Text: &DAZzle
5. Click "Save"
6. Switch to the Toolbars tab
7. In the commands box you should see DAZzle listed. Click Insert and DAZzle is added to the toolbar. Reposition the DAZzle button as desired.

Using ACT! from DAZzle The procedures for using ACT! in DAZzle are the same for ACT! 4 as for versions 2 and 3. Set it up under File|Preferences|PIMs. See DAZzle’s on-line help.
Updated June 04, 1998
© Copyright 1998, Envelope Manager Software (legal notices)